Starmatrix Clever-Pool/220V - Page 15

Press the SET/RESET button to store the time. The display will now show the current time with flashing cursor and the word
now
shown at the top.
4.2 Auto Mode timer and Speed setting
In stop mode press the SET/RESET button, The display should show CURRENT TIME, START TIME, STOP TIME and the
stored
time with hours digits flashing. This is the start time for AUTO MODE 1.
Press the SET/RESET button to step over from hours to minutes and from Start Time to Stop time
Press the up or down button to select the hours.
- 15 -