To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Level x 1
• Grounding Wire x 1
• Phillips Head Screwdriver x 1
Unpacking the Rack
Warnings: The Rack is heavy and you should exercise cau-
tion when you remove it from the Pallet.
At least three people are required to unpack the Rack. Do not
attempt to unpack the Rack by yourself.
1. Carefully move the shipping Pallet to a level surface.
2. Remove the Tie Straps from the Shipping Carton.
3. Remove the Shipping Carton being careful not to tip the
Rack.
4. The 1U Cabinet Shelf box will be shipped in the Rack’s
interior.
5. Remove the Tie Straps from 1U Cabinet Shelf box and
carefully lift the 1U Cabinet Shelf box out of the Rack
through either the front or rear door.
To Next Page
Loading...
