Instruction manual
7
Requirements
• Two monitors or displays that are compatible with one of the VESA mounting hole
patterns that ARMDUALV supports
• A Phillips screwdriver
Requirements are subject to change. For the latest requirements, please visit
www.StarTech.com/ARMDUALV.
Assembly
Warning! Make sure that the weight of the monitors does not exceed the weight
capacity of this product. If you exceed the weight capacity, you might experience
personal injury or damage to the product.
This product can support the following weight: Up to 10 kg (22 lb.) per monitor mount.
Attach the ARMDUALV to your mounting surface
You can use either the desk clamp or grommet mount to attach the ARMDUALV to
your mounting surface.
Use the desk clamp to attach the ARMDUALV
1. Remove the backing from the ve rubber pads and ax them to the underside of
the desk clamp. (gure 1)
Rubber pad
Desk clamp
gure 1
To Next Page
Loading...
