StarTech.com ARMDUALV - Page 12

Instruction manual
8
2. Thread the cable-management clip and the cap onto the lower pole.
3. Screw the lower pole into the top of the desk clamp. (gure 2)
4. Use the 3 mm hex key to tighten the screws in the desk clamp, and push the cap
down so that it sits ush against the top of the desk clamp and covers the screws.
(gure 3)
gure 2
Lower pole
Cable-management clip
Cap
Desk clamp
gure 3
Cap
3 mm hex key
Desk clamp