Instruction manual
9
5. Turn the knob on the desk clamp counterclockwise until you reach the thickness of
the desk or table that you’re attaching the ARMDUALV to.
Note: The desk clamp can accommodate a mounting surface that is between
10 and 88 mm (0.4 and 3.46 in.) thick.
6. Slide the desk clamp over the edge of the desk or table. (gure 4)
7. Turn the knob clockwise to tighten the desk clamp.
gure 4
10-88 mm
Desk clamp
To Next Page
Loading...
