StarTech.com ARMDUALV - Attach a VESA Monitor Mount

Instruction manual
12
7. Thread the grommet plate onto the rod.
8. Position the grommet collar and pole over the grommet hole.
9. On the underside of the mounting surface, thread the rod up through the grommet
hole and into the grommet collar and pole, and turn the knob clockwise. (gure 9)
gure 9
Grommet plate
Rod
Knob
Attach a VESA monitor mount
1. Slide one of the VESA monitor mounts down the lower pole.
2. When the VESA monitor mount is at the desired height, use the 5 mm hex key to
tighten the screw at the back of the monitor mount. (gure 10)
VESA monitor mount
Lower pole
5 mm hex key
gure 10