StarTech.com USB32HD2 - Page 24

23
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.StarTech.com/support
3. Click the Display Number that corresponds to the monitor
that will be congured for a Mirror Conguration. The
selected monitor will become highlighted.
Note: It’s possible that two numbers may appear within
the same monitor block. This indicates that the monitors
are currently already congured for a mirror conguration.
However, it may not be in the desired mirror conguration.
If the desired Display Number appears within the same
monitor block as another number that’s not the desired
conguration, the monitors will need to be separated into
an Extended Conguration. To separate the monitors into
an Extended Conguration, follow the steps outlined in
the Conguring Display Devices for an Extended Windows
Desktop (p.14) section of this manual.