32
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.StarTech.com/support
Setup Notes & Recommendations:
• This device is only supported in Windows operating systems.
• This device provides video output only, and cannot be used
to input or capture video to the Host Computer.
• USB Display Adapters require an existing video card or
integrated graphics chip from Intel, AMD, or NVIDIA. A
WDDM (Windows Display Driver Model) compatible driver
must already be installed prior to installing the driver for this
product. Most computers from 2007 or newer will meet this
requirement.
• Make sure any outstanding Windows updates are installed to
ensure the Host Computer is running the most up-to-date
version of Windows.
• The following only applies to computers running Windows
8.1 and earlier operating systems. The software from other
USB display adapters, and some laptop docking stations,
can interfere with the installation and operation of this
USB Display Adapter. It’s recommended that software from
DisplayLink/Synaptics, Silicon Motion, and Fresco Logic be
removed prior to installing the driver for this product.
• It’s recommended that all available onboard video output
ports are exhausted before adding a USB Display Adapter.
• USB32HD2 will not work at 4K if connected to a USB 2.0 port.