3
Installation
1. Connect the included power adapter from an AC electrical outlet to the USB
Docking Station.
2. Insert the provided Driver CD into the computer’s CD/ DVD drive.
3. Autorun should give you the option to run the Setup.exe application.
If Autorun does not start, Go into “My Computer” and double-click the CD/DVD drive
that the CD is in and run the Setup.exe application.
4. Run the “setup.exe” le on the CD to launch the driver installation program. Follow
the on screen instructions to complete the driver installation.
5. Please wait while the installation program copies the necessary les.
6. Connect the Docking Station to the computer using the included USB 3.0 cable.
Windows will automatically detect and install the drivers.
7. Connect the monitor(s) to the USB Docking Station using HDMI, DVI-D or VGA
cables and power on the monitors. Please choose the dual output connection
combination as either:
a.) HDMI + DVI
b.) VGA + HDMI
NOTE: Please do not connect monitors to the VGA, DVI-D, and HDMI ports
simultaneously. It can cause unexpected errors in your monitor conguration.
8. Windows will start to automatically load the drivers and software for the USB display
adapter. Once complete, you should see this icon in your System Tray:
To Next Page
Loading...
