Starway modena - Safety Information; General Instructions; Warnings and Installation Precautions

Page 40
WARNING! Before carrying out any operations with the unit,
carefully read this instruction manual and keep it with cure
for future reference. It contains important about the installation,
usage and maintenance of the unit.
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives
and are there-fore marked with CE:.
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled
personnel only. Never make any modications on the unit not described in this instruc-
tion manual, otherwise you will risk an electric shock.
• Connection must be made to a power supply system tted with efcient earthing (Class I
appliance ac-cording to standard EN 60598-1 ). It is, moreover, recommended to pro-
tect the supply lines of the units from indirect contact and/or shorting to earth by using
appropriately sized residual current devices.
• The connection to the main network of electric distribution must be carried out by a
qualied electrical installer. Check that the main frequency and voltage correspond to
those for which the unit is designed as given on the electrical data label.
• Never use the xture under the following conditions:
- in places wet;
- in places subject to vibrations or bumps;
- in places with an ambient temperature of over 45° C.
• Make certain that no inammable liquids, water or metal objects enter the xture.
• Do not dismantle or modify the xture.
• All work must always be carried out by qualied technical personnel. Contact the near-
est sales point for an inspection or contact the manufacturer directly.
• If the unit is to be put out of operation denitively, take it to a local recycling plant for a dis-
posal which is not harmful to the environment.
WarninGs and installation Precautions
• Never let the power cord come into contact with other cables! Handle the power cord and
all connections with the mains with particular caution!
• Never modify, bend, mechanically strain, put pressure on, pull or heat up the power cord.
• Never strain the cable. There must always be sufcient cable going to the device. Otherwise,
the cable will be damaged, which can cause serious damage.
• Never remove warning or informative labels from the unit.
• Never use anything to cover the ground contact.
• Never lift the device holding it by the projector-head, as the mechanics may be damaged
• Do not shake the device. Avoid brute force when installing or operating the device.
• Only operate the device after having checked if the housing is rmly closed and all screws
are tightly fastened.
• Only operate the device after having familiarized with its functions.
• Avoid ames and do not put close to ammable liquids or gases.
• Always allow a free air space of at least 0.8 m around the unit for ventilation.
• Always disconnect power from the mains, when device is not used or before cleaning! Only
handle the power cord holding it by the plug. Never pull out the plug by tugging the power
cord.