Stat-X SDRP - System Parts List and Replacement Parts List; Miscellaneous Notes; Battery Storage

Fireaway Inc. Version 1
5852 Baker Road 10/2017
Minnetonka, MN 55345 P/N 19112
21
7. System Parts List and Replacement Parts List
Part
Number
Component Description
830001
Control Panel, SDRP, Battery Powered Panel,
830002
Module, Test,
830003
Switch, Toggle, Manual Release,
830006
Cable Assy, SDRP, Battery Powered Panel,
(24” Unterminated Actuation Leads)
830007
EOL Assy, Detection, Class B, Deutsch
830009
Battery Kit, Replacement for 830001, LiSOCl
830010-xxx
Sensor, Spot Thermal, Thermotech xxx deg F, Vertical Internal
830011-xxx
Sensor, Spot Thermal, Thermotech xxx deg F, Vertical All Weather
830012-xxx
Sensor, Spot Thermal, Thermotech xxx deg F, Vertical All Weather 1/2 Conduit
830013-xxx
Sensor, Spot Thermal, Thermotech xxx deg F, Explosion Proof
830020-xxx
Linear Thermal Wire, 155
o
F Type XCR, xxx' length
830021-xxx
Linear Thermal Wire, 190
o
F Type XCR
830022-xxx
Linear Thermal Wire, 220
o
F Type XCR
830023-xxx
Linear Thermal Wire, 280
o
F Type XCR
830024-xxx
Linear Thermal Wire, 356
o
F Type XCR
830025-xxx
Linear Thermal Wire, 135
o
F Type XLT
8. Miscellaneous Notes
a. Battery Storage
STORAGE: Store in a cool, regulated (preferably below 21°C and in any case below
30°C), dry and ventilated area, away from possible sources of heat, open flames, food
and drink. Avoid exposure to direct sunlight for long periods. Temperatures above 100°C
(or higher for high temperatures cells and batteries such as the LSH20-150 cell, refer to
individual data sheets for maximum temperatures) may cause leakage and rupture, and
result in shortened battery service life. Keep proper clearance space between batteries
and walls. A short circuit can cause burn hazard, leakage or explosion hazard. Keep
batteries in original packaging until use and do not mix them.
HANDLING:
Do not open the battery system.
Do not crush or pierce the cells.
Do not short (+) or (-) terminal with conductors.
Do not reverse the polarity.
Do not submit to excessive mechanical stress.
Do not mix batteries of different types or mix new and old batteries together.
Do not use the unit without its electronic management system.
Do not expose the unit to water or condensation.
Do not directly heat, solder, or throw into fire.