Statebourne cryogenics Biosystem 24 - Page 21

Page 21
To access the printer routine press the MUTE and SECRET keys simultaneously. The following message will
appear.
Press the FILL switch and the display will change to:-
PRESS AND HOLD the TEST switch to print the Data Log (There will be a bleep followed by a gap and 3
further bleeps before printing commences).
Or…
Press the FILL switch to select the next option.
If the FILL switch is pressed the display will change to:-
PRESS AND HOLD the TEST switch to print the Temperature Log (There will be a bleep followed by a gap and
3 further bleeps before printing commences).
Or…
Press the FILL switch to select the next option.
If the FILL switch is pressed the display will change to:-
PRESS AND HOLD the TEST switch to print the Alarm Log (There will be a bleep followed by a gap and 3
further bleeps before printing commences).
Or…
Press the FILL switch to select the next option.
If the FILL switch is pressed the display will change to:-
(Data Log.)
(Temperature Log.)
(Alarm Log.)