Page 22
PRESS AND HOLD the TEST switch to print the Fill Activity Log
(There will be a bleep followed by a gap and 3 further bleeps before printing commences).
Or…
Press the FILL switch to select the next option.
If the FILL switch is pressed (i.e. No print options have been selected) the display will change to:-
(See the section on Clearing the Data Log)
Press the FILL switch the display will change to:-
(See the section on Data Recovery)
Press the FILL switch to return to the temperature display.
If any of the print options are selected the digital display will return to its temperature readout mode and printing
will continue until complete. During printing the Controller will function as normal though logging will be
temporarily suspended.
At the end of printing the sounder will give one long bleep.
If the printer becomes unavailable while printing is in progress, an alarm will be activated.
(Fill Activity Log.)
(Clear Data Log.)
(Data Recovery.)
To Next Page
Loading...
