To Next PageTo Next Page
Need help?Do you have a question about the Staubli KBT10BV-AX/M C Series and is the answer not in the manual?
General| Category | Cables and connectors |
|---|---|
| Manufacturer | Staubli |
| Series | C Series |
| Connector Type | Circular |
| Number of Contacts | 10 |
| Mounting Type | Panel Mount |
| Type | Connector |
Follow five safety rules for electrical installations, ensuring disconnection and verification of voltage absence.
Warning against disconnecting under load. Plugging and unplugging when live is permitted for this product.
Visually inspect connectors for defects before each use. Consult a specialist if safety is in doubt.
Protect unmated connectors from moisture/dirt. Refer to product catalog for technical specifications.
Lists necessary tools including lever press, VR10BV-WZ tool, metal/plastic tube, and knife.
Details the process of installing the locking ring, starting with cutting insulation on the colored sleeve.
Continues assembly: stripping insulation, mounting the locking ring with guide into slot, and using lever press.
Explains mating plug and socket using bayonet lock, aligning markings, and turning 50 degrees to engage.
Details releasing the locking ring using the VR10BV-WZ tool, aligning markings, and turning 50 degrees to disconnect.
Describes coding possibilities (C1-C5) recommended for interchangeability, mapping phases and neutral to codes.
Plugs only insert into sockets with the same code number, indicated near white markings.
