To Next PageTo Next Page
Need help?Do you have a question about the Staubli KBT21/M40 C Series and is the answer not in the manual?
General| Category | Cables and connectors |
|---|---|
| Type | Connector |
| Series | C Series |
| Model | KBT21/M40 |
| Connector Type | Circular |
| Number of Contacts | 21 |
| Voltage Rating | 250 V |
| Housing Material | Thermoplastic |
| Contact Material | Copper alloy |
| IP Rating | IP67 |
Work in a de-energized state and follow five safety rules for electrical installations.
Plugging and unplugging connectors when live is permitted under specific conditions.
Visual representation of the socket and its crimp connection.
Visual representation of the plug and its crimp connection.
Elpress crimping tool V1311 or V1311-A with specific crimping dies.
Includes stripping tool and open-end spanners for assembly.
Tool for applying precise torque to connector components.
Adapting the two-piece rubber seal to the cable's outer diameter.
Sliding the cable gland and stripping the cable insulation to the correct length.
Inserting wires into the crimp sleeve and performing the crimp.
Checking the crimp size against the specified control dimension X.
Warning against soldering or welding the cable during termination.
Assembling distance tube halves and inserting the O-ring.
Fitting the contact insert and tightening the cable gland with torque.
Securing the protective cover to the connector using the cord loop.
Explanation of mechanical coding possibilities for interchangeability.
Operation of the locking pin for secure connection and disconnection.
Steps for mating the plug and socket using the bayonet lock.
Verifying the connection's mechanical security after mating.
Steps for safely disconnecting the plug and socket.
Checking the seal for damage and replacing it if necessary.
