CERTIFIES,
That the machine:
Type: COMBINED MITRE SAWING AND
BENCH SAWING MACHINES.
Model: SC-241-W, SC 250W PRO
SC-250-W, SC-261-W,
SC-264-W, SC-265-W,
SC-291-W, SC2500W,
SCE-1650-W, SLL-265-W
Are in conformity with the provisions of Directive
98/37/EU
As well as with the following regulations:
· UNE-EN-61029-1
· UNE-EN-61029-1/A11
· UNE-EN-61029-1/A12
· UNE-EN-61029-2/9
· UNE-EN-61029-2-11
· UNE-EN ISO 12100-1
· UNE-EN ISO 12100-2
· Directive 2004/108/EU
· Directive 2006/95/EU.
It has received a Type Certificate with the number
43/3M/02/000024 (SC241W, SC 250W PRO,
SC250W, SC265W, SCE1650W, SC261W,
SLL265W, SC291W, SC2500W)
43/3M/02/000025 (SC264W)
Issued by the notified body:
0056 ECA, ENTIDAD COLABORADORA DE LA
ADMINISTRACIÓN S.A.U.
Av. Roma, 21 / 43005 TARRAGONA
Signed: Ramiro de la Fuente
Director General
January 5, 2015
ENGLISH
39
39
The values given are valid for nominal voltages [U] 230/240 V ~ 50/60 Hz - 110/120 V ~ 60 Hz. For lower
voltage and models for specific countries, these values can vary. Please observe the article number on the type
plate of your machine. The trade names of the individual machines may vary.
TECHNICAL DATA
Terms of warrantee
As professional equipment, the warrantee period is
set to one year as from the date of purchase.
The warrantee will immediately cease to exist when
the client's service of the central offices does not
have the warrantee card within a one-month term
as of the date of purchase.
The warrantee will equally cease to exist when the
machine has been used in an inappropriate manner
or making use of accessories being unsuitable for
the uses as foreseen by the manufacturer.
The warrantee is limited solely to manufacturing or
mechanization failures, and it ceases to exist when
parts thereof have been disassembled,
manipulated or repaired out of the manufacturing
plant.
STAYER obliges itself to repair or replace the
product or the parts thereof that may be faulty, free
of charge only after a check and at the exclusive
criterion of its technicians.
It is considered that all costs for transportation and
disassembling will be borne by the purchaser.
So as to facilitate the technicians' work, please
attach a description of the failures that the client has
noticed at the tool during the use thereof.
25.Declaration of Conformity
EU DECLARATION OF CONFORMITY
The undersigned: STAYER IBÉRICA S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía
Sector 1 - 28320 PINTO (MADRID)
Tel.: 902 91 86 81/ Fax: 91 691 91 72
To Next Page
Loading...
