Need help?Do you have a question about the STE MS16 and is the answer not in the manual?
Describes the switcher module initialization process upon power-on and keyboard readiness.
Explains the two LCD displays showing switcher status, sources, and output connections.
Details how to select a source and route it to any of the 15 outputs using the front panel keys.
Allows simultaneous switching of video and audio levels when executing a cross point.
Covers selecting and saving one of the 16 global memories (presets) for the switcher configuration.
Accesses advanced system settings like Master/Slave configuration and more.
Configures the baudrate and data format for the RS232 serial communication interface.
Options to lock the keyboard or prevent modification of saved presets.
Describes physical connections for PC, Mac, Crestron, and AMX systems via RS232c.
Lists and explains hexadecimal commands for switching sources, data transfer, and global switching.
Explains commands for saving operating presets (Bx) and reading operative preset data (D0).
Guides on downloading and installing the MS8 DEMO software for PC remote control.
Details regulatory compliance, product description, and reference rules for the device.
To Next Page
General