www.stealthcam.com
Toll Free 877-269-8490
9
QUICKSTARTGUIDE
This guide is designed to get you up and running in a matter of moments. To get the
most out of this advanced scouting tool s, please read the manual thoroughly before
operating the camera. If you would like to modify any of the factory Default Settings,
exceptfortheTime&
Date,pleaseseemanualforinstructions.
FACTORYDEFAULTSETTINGS:
OperationMode:PIR ProgramControlSwitch:Custom
TimeOut:30Seconds BurstMode:1StillImage(3.0MpResolution)
VideoMode:10Seconds(VGAResolution)
TimeLapseSetting:18:00–8:00NextDay
CAMERASETUP:
1. Install8“AA”cellbatteries
incorrectpolarity(+/‐)asindicatedinbattery
compartment.
2. InsertSDcardintothecamera.
3. TurnpowerontoadjustTimeandDate.
SETTIMEANDDATE:
1. SwitchthecameratotheONposition.
2. Pressthe[MENU]buttontoentermenusettingsscreen.
3. Pressthe
[UP]or[DN]buttonuntilthewordPIRblinking
4. Pressthe[OK]buttontoconfirm.
5. Press the [UP] or [DN] button to scroll through different setting modes until the
wordTIMEblinking.
6. Pressthe[OK]buttontochoosetheTimesettings.
7. Press the [UP] or [DN]
button to adjust the Minute setting and press [OK] to
confirmandmovetotheHoursetting.
8. RepeattosetHourandthenpress[OK]toconfirmandmovetoDate.
9. AdjusttheMonth,DayandYearbyusing[UP]or[DN]button.Eachtimeyoufinish
an adjustment
you must press the [OK] button to confirm and move to the next
fieldforadjustment.
10. Oncedone,theword‐dEL–willbeblinking.
11. Pressthe[MENU]buttontoexitandstartusing.
www.stealthcam.com
Toll Free 877-269-8490
10
BATTERYANDMEMORYINSTALLATION
Your Stealth Cam Advanced Digital Scouting Camera is designed to
operateusingtwodifferenttypesofbatterypoweroptions.
Batteries“AA”cell
The internal battery compartment accepts 8 “AA” cell batteries.Be
sure to use high quality brand name alkaline batteries.Install
batteries with correct polarity (+/‐) as noted inside the battery
compartment.
12VLeadAcidexternalbattery
The camera is equipped with an external power jack designed to
acceptabarrelplugcableattachedtoasealedleadacidbattery.(Sold
separately).Batterycableandcomplete12VLeadAcidbatterykitsare
available wherever Stealth Cam scouting cameras are soldor calltoll
free 877‐269‐8490.Only
Stealth Cam external battery accessories are
recommended.
• MakesurecameraisintheOFFposition.
WARNING: Do not use different Voltage lead acid battery other than
the one specified in this section. Doing so will damage the camera
and will void the warranty.
WARNING: ALWAYS have the camera in the OFF position when
installing or removing batteries and memory card. Removing
batteries or memory card while the camera is ON may damage the
camera.
www.stealthcam.com
Toll Free 877-269-8490
11
• InserttheexternalbatterybarrelplugintotheDC12Vjackonthe
bottomofcamerahousing.
• Turnthecamerapoweron.
NOTE: Please make sure the voltage and polarity (+/‐) are correct
beforeconnection.Incorrectvoltageorpolarity(+/‐)willdamagethe
camera. When both internal and external batteries are connected,
thecamerawilldrawpowerfromthehighervoltagesourcefirst.
MemoryOptions
The camera is also equipped with an expandable media card slot
capable of accepting up to 16GB SD card (sold separately). The front
counterdisplaywillshowthenumberofimagesstoredontheSDcard.
IfnoSDcardisinsertedthefrontcounterdisplaywillshow“NOSd”.
WARNING: The above camera will not accept any High Speed
memory cards. Common verbiage that will indicate High Speed
includes but is not limited to: Extreme, Ultra, Optima, Micro,
Platinum
Store and Shoot.
www.stealthcam.com
Toll Free 877-269-8490
12
InsertingSDMemoryCard
NOTE:Make sure camera is in the OFF positionwheneveradding or
removingmemory.
• InsertSDmemorycardintotheSDcardslotcompletelyandinthe
correctdirectionasshownbythestickerlocatedatthesideofthe
housing.
• ToremovetheSDmemorycard,depresstheSDcardandpullout
thecardgently.
• SDcardsmustbe
clean(noimagesfromothersources).Ifyouare
usingtheSDcardfromothercameras,pleasemakesuretoformat
the SD card in your computer prior to use in your camera.New
cardsaregoodtousestraightfromthepackage.
FORMAT – Definition: When you format a SD memory card, the
operating system erases all information and files on thecard. Then it
creates an internal address tables that it later uses to locate
informationandfiles.Formattingalsoremoves allHiddenSystemfiles
aswell.BasicallyitcleansyourSD
memorycardjustlikeifitwasbrand
new.Pleasemakesuretofollowtheguidelineslistedbelow:
SDCardsize:2GBorbelow,formatusingFileSystemtype“FAT”.
SDCardsize:4GBorabove,formatusingFileSystemtype“FAT32”.
DonotuseFileSystemtype
“NTFS”or“exFAT”,theseformatsarenot
supported.
To Next Page
Loading...
Need help?
General
