Page 8
Camera Setup
Battery Installation
To remove batteries from unit, simply open camera and slide the
battery release switch to the left. Once the battery compartment is
open, insert batteries into camera, being careful to match the orien-
tation marked on your camera. After batteries are inserted, close the
battery compartment and secure the battery release switch.
SD Card Installation
SD card slot is located on the
bottom of the camera, above the
battery compartment. Insert SD
card with the label facing back of
camera. Only minimal resistance
should be felt as card is inserted
and a click when the card is fully
inserted.
To Next Page
Loading...
Need help?
General
