STC-WD1
www.stealthcam.net Toll Free 877-269-8490
17
Set Date and Time: This camera uses the 24hr military time
format.
• The word TIME and minute digit will be blinking.
• Press [OK] to choose the selection
• Press [UP] or [DN] to increase or decrease the minute value
(01 – 59)
• Press [OK] to confirm the minute setting and enter hours
setting {HH (Hour) will be blinking}
• Press [UP] or [DN] to increase or decrease the hour value
(01 – 24)
• Press [OK] to confirm the hour setting and enter month setting
{MM (Month) will be blinking}
• Press [UP] or [DN] to increase or decrease the month value.
(01 – 12)
• Press [OK] to confirm the month setting and enter date setting
{DD (Date) will be blinking}
• Press [UP] or [DN] to increase or decrease the date value.
To Next Page
Loading...
Need help?
General
