Stealth Cam STC-WD1 User Manual

STC-WD1
www.stealthcam.net Toll Free 877-269-8490
12
Set up and Programming
When the camera is first turned on the internal LCD screen
displays the camera status. The following information is present
on this screen.
If no buttons are pressed after 30 seconds the LCD screen will
power down to conserve battery life and enter 1 minute count
down to enter PIR detection mode. To re-power the display
screen press and hold the UP or DOWN button for at least 5
seconds.

Stealth Cam STC-WD1 Specifications

General

Brand	Stealth Cam
Model	STC-WD1
Category	Scouting Camera
Language	English