Stealth F-37 - Page 13

STEALTH ELECTRIC BIKES OWNER’S MANUAL
V 2.4 PAGE | 13
Before installing the battery, remove the make sure that the foam surrounding the battery position is in place and intact.
There are two different capacity batteries used for the P-7. They are slightly different sizes. The larger of the two will have
two distinct plugs exiting the battery, the other will have just one. The P-7 with a smaller battery will come with an adapter
installed on the bike so the battery can be plugged in directly to the P-7.
The foam that retains your battery will have been installed to fit the battery capacity ordered with your bike.
Ensure foam is clean and clear of obstructions
Ensure Remove the 4 bolts with a 4mm hex key.
foam is clean and clear of obstructions