STEAMCORE SPA II - Installation of the Top Light

!
Installation of the top light
CAUTION:
The rating
of the light should not surpass 3 Watts (rated power) to prevent damage to
the transformer.
!
CAUTION:
Take some moisture proof measures in the process of installation. Do
not let the electrical components be exposed to moisture or, it will cause damage or
short circuit.
The illustration is just for explaination,the practical installation must comply with
the nation's electric criteria, and performed by a professional licensed electrician.
!
CAUTION:
(Possible location)
The steam outlet
Under Sink
(possible location)
The steam generator
Light
The steam control panel
User Manual
The LED light should be installed on top of the steam room ceiling or in a place not accessible to children.
CAUTION: Installer must take some moisture proof
measures in the process of installation.
Electrophorus components cannot be
exposed to moisture, as it will cause damage
to the light components causing a possible
short circuit.
12