Steamfast SF-447 - Using Your Deluxe Compact Garment Steamer; Filling the Water Reservoir

6
|
ENGLISH
FILLING RESERVOIR WITH WATER
1. Place Deluxe Compact Garment Steamer on a at, level surface.
2. Make sure power cord is unplugged from electrical outlet.
CAUTION: If unit has been in use, allow Reservoir to cool (5 minutes for minimum cooling
before removing Water Reservoir Cap and adding water).
3. Remove Water Reservoir Cap by turning clockwise.
4. Carefully ll Reservoir with water from a faucet, bottle or cup. Use Reservoir Level Window
to gauge water level, stopping when it reaches the MAX mark.
WARNING: MAX mark on Reservoir Level Window represents the unit’s maximum usable
water capacity (11.35 oz. / 335 ml.). Exceeding this amount will result in water spitting
from Steam Nozzle.
NOTE: In order to minimize potential mineral build-up and prolong the life of your Deluxe
Compact Garment Steamer, distilled or de-mineralized water is recommended when
llingReservoir.
5. Replace Water Reservoir Cap by turning counter clockwise and until the arrows are aligned.
Aligned Arrows
Using Your Deluxe
Compact Garment Steamer