24
∙ Note: after completing the process, the chamber will be vented. If the device beeps
3 times and CLO is displayed, the door can be opened.
To repeat
∙ If the chosen vacuuming or marinating program is used more often, put a new bag
into the device and close the door. The device starts automatically.
∙ The program can be deleted with the stop button.
Quick start guide
∙ Plug in the device and turn it on with the ON/OFF button on the side of the device.
∙ Press the power button.
∙ Use the set button to select between Seal time and Marinating time.
∙ Press the set button again and change the values with +/-
∙ Select the level of vacuum with the vacuuming button. Change the values with +/-
∙ Press the start button, the chosen program starts to work.
∙ Note: after the program is finished you can re-equip the device. Close the door, the
previous set program starts automatically.
To Next Page
Loading...