26
742.110 | 14.50
EN
Switch-off temperature difference
T
T
F
unc
SET
off
If a function contains a differential thermostat then the switch-
off temperature difference can be set. The affected sensor
symbols blink while settings are being performed.
Switch-on temperature
If a function contains a thermostat then the switch-on tempera-
ture can be set. The affected sensor symbol blinks while settings
are being performed.
Switch-off temperature
If a function contains a thermostat then the switch-off tempera-
ture can be set. The affected sensor symbol blinks while settings
are being performed.
Time control
If a function is to be time controlled then the time control must
be activated and the time windows must be set (cc = clock
control). In the Fig. at the left the time control is switched off
(off).
Starting time of a time window
When setting the start time of a time window, the following is
displayed to the left of the start time (see Fig. left):
•
• Number of time window 1 ... 3, whose end time is to be set
(in this case: 1)
• on
To Next Page
Loading...