3
742.110 | 14.50
EN
1 General safety instructions
• This document is part of the product.
• Use the device only after reading and understanding this document.
• Keep this document in a safe place for the entire service life of the device. Pass this
document on to subsequent owners and operators of the device.
• Adhere to all safety instructions. Consult (further) professional personnel in the
event of any ambiguities.
• The measures described in this document may only be performed by qualified
technical professionals. Exception: End-customers may operate the device when they
have previously been trained by a technical professional.
• The solar system can be damaged by improper operation of the device.
• The device must not be connected to the mains power supply when
– the casing is open or damaged.
– cables are damaged.
• Factory labels and markings must never be altered, removed or rendered unreadable.
• Observe the prescribed conditions of use, see section 15, p. 45.
• This device is not intended for:
– Children
– Persons with physical, sensory or mental impairment
– Persons without sufficient experience or knowledge unless they are instructed in
the use of the device, and initially supervised, by a person responsible for their
safety.
This product is CSA certified and complies with the requirements of the applicable UL
and CSA standards in terms of design and operating behaviour. Please contact your
dealer should you require further information on this.
14 Troubleshooting 42
14.1 General faults 42
14.2 Error messages 43
14.3 Checking the Pt1000 temperature sensors 44
15 Technical data 45
15.1 Controller 45
15.2 Cable specifications 46
16 Exclusion of liability 46
17 Legal guarantee 46
18 Notes 47
To Next Page
Loading...