Steelcase Leap 462 User Manual

Page 1 of 4
939504704 Rev D
®
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©
2003 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
462 Leap
®
Fixed and Depth Seat Replacement
(For chairs manufactured prior to July 18, 2005)

Steelcase Leap 462 Specifications

General

Type	Office Chair
Manufacturer	Steelcase
Model	Leap 462
Weight Capacity	400 lbs
Lumbar Support	Adjustable
Tilt Lock	Yes
Tilt Tension Adjustment	Yes
Back Height Adjustment	Yes
Armrest Adjustment	Height, Width

Summary

Fixed Seat Replacement

Remove Seat Screws and Slide Off

Remove screws securing the seat and slide the seat off the mechanism.

Remove Shell Screws

Remove the screws securing the seat shell.

Remove Seat Support Plate Screws

Remove the screws attaching the seat support plate.

Reassemble Seat Plate

Reassemble, ensuring the plate is correctly captured in the tab.

Depth and Angle Seat Replacement

Slide Seat Forward with Lever

Slide the seat fully forward while holding the side lever.

Disengage Quick Release Lever

Disengage the quick release mechanism on the chair's left side.

Remove Shell Screws

Remove the screws from the seat shell.

Remove Front Panel Screws

Remove the screws from the front panel of the seat assembly.

Reassemble Seat Plate

Reassemble, ensuring the seat plate is properly captured in the tab.