PRODUCT BRIEF INTRODUCTION
[ 9 ]
PRODUCT BRIEF INTRODUCTION
[ 10 ]
3. CROSSOVER X-TPE.
To choose different crossover type, for example select CH selection on 3RD
spot .that would locate CH you want to choose for crossover configuration .
4. CROSSOVER FREQUENCY.
Set frequency of LP/HP individually .
5. GAIN.
0--40dB is optional range for gain control kf every CH.
6. DELAY.
1.Auto configuration(base on 1.5 setting).
2.Manual configuration, change specifications in selected CH manually.
7. LP/SLOPE.
1.6dB/oct 12dB/oct 18dB/oct 24dB/oct 30dB/oct
36dB/oct. 42dB/oct 48dB/oct are available.
8. HP/SLOPE.
1.6dB/oct 12dB/oct 18dB/oct 24dB/oct 30dB/oct
36dB/oct.42dB/oct 48dB/oct are available.
10. WRITE.
To Write To Device(POS1-POS8).
9. Filter Model.
To choose different Filter type Linkwitz Bessel Butterworth.
To Next Page
Loading...
