To Next PageTo Next Page
Need help?Do you have a question about the Steg K 2.01 and is the answer not in the manual?
Details the items included in the amplifier's packaging.
Overview of Kcompetition stereo audio power amplifiers for car use.
Describes the RCA stereo input for connecting audio sources.
Explains the filter devices for limiting output frequency bands.
Steg Multi-way Modular System for complex system configuration.
Explains speaker connection terminals and configuration options.
Details connecting the battery, ground, and remote terminals.
Connects remote tuning devices for adjusting listening parameters.
Optional devices to combine amplifier power for single high-power speakers.
Digital Protection Manager system for monitoring amplifier status.
Digital language for PC communication with integrated microprocessor.
Software for managing amplifier's digital functions via PC.
Suppresses electrical and electromagnetic interference from the vehicle.
High-efficiency cooling system with dynamic fan control.
Specifies test conditions for amplifier performance measurements.
Illustrates the internal signal flow and component connections.
Provides the physical dimensions of the amplifier models.
Instructions on how to securely mount the amplifier using provided hardware.
Connects power, remote switch-on signal, and remote control devices.
Explains the meaning of Green "ON" and Red "PT" indicator lights.
Details RCA connections for left, right, and mono signals.
Adjusts input sensitivity and selects stereo or mono input mode.
Manages crossover filter activation, frequency selection, and settings.
Fine-tunes filter characteristics by adjusting Q factor and slope settings.
Connects speaker systems in stereo, bridged mono, or trimode setups.
Captures source signal from RCA jacks for use with other amplifiers.
Connects stereo or monophonic signals from the source to the amplifier.
Connects the speaker system to the amplifier's terminals based on configuration.
Details impedance limits for speaker connections and passive filter component values.
Connects SERIALPOWER, remote control, and STEGLINK for advanced functionality.
Guides first-time users through initial setup and LED status interpretation.
Step-by-step guide to adjust input sensitivity for optimal sound performance.
Details how to set up crossover filters using AQXM2 modules or SW4FQ selector.
Fine-tunes filter characteristics by adjusting Q factor and slope settings.
Instructions for safely replacing a blown fuse with an identical one.
Information on obtaining technical support, repairs, and A.T.R.I. services.
Specifies where to find model and serial number for support inquiries.
Provides a systematic approach to identifying and resolving common amplifier faults.
Addresses issues related to sound distortion, engine humming, and noise.
General
