Need help?Do you have a question about the Steg SDSP 4 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Power at 4 Ohms | 4 x 100 W |
| Power at 2 Ohms | 4 x 150 W |
| Bridged Power at 4 Ohms | 2 x 300 W |
| Signal-to-Noise Ratio | > 90 dB |
Lists all items included in the DSP package.
Details available input signals and connection ports for the DSP unit.
Guide on how to use the graphical user interface for DSP control and adjustments.
Select input devices and configure channel-specific settings like input, output, and filters.
Instructions for saving presets and writing configuration to the device.
Provides specifications for power supply, signal stage, input stage, and connections.
Details on setting EQ Q value and viewing crossover/EQ frequency charts.
To Next Page
