Steg SDSP 6 - 6 Software Installation; DSP GUI Installation; 7 Gui Operation Instruction; Guide to GUI after Installation

PRODUCT BRIEF INTRODUCTION
[ 9 ]
PRODUCT BRIEF INTRODUCTION
[ 10 ]
6.SOFTWARE INSTALLATION
6.1 DSP GUI installation
1.Insert CD, Double-Click DSP
7.GUI OPERATION INSTRUCTION
7.1 Guide to GUI after installation
1. Double - click icon of DSP-CONTROL
STEG DSP
v1.0.0
3.Click NEXT
4.Click NEXT
5. Set install location
6.Wait until the process finish 7.Click finish
2.Wait until the process finish
2. DSP connection