EasyManua.ls Logo

Steinbach Poolrunner Twin - Page 28

Steinbach Poolrunner Twin
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5. Select the desired autostart function. See section "Functions of the control unit".
6. Start the cleaning program and adapt the battery runtime to the size of your pool. See section
"Functions of the control unit".
Selecting the filter bag
The device is supplied with filter bags with different degrees of fineness.
Select the right filter bag according to the degree of soiling or carry out a rough and then a fine cleaning.
coarse soiling
Plastic filter bag (black)
6
for insects and leaves
fine soiling
Fleece filter bag (white)
11
for pollen and sand
NOTICE!
Filter bags pulled on top of each other can lead to overheating of the motor.
-
Never pull more than one filter bag over the filter unit.
Inserting the filter units
1
1
2
2
2
2
7
1. Unscrew the fixing screw
1
.
2. Take the top part
2
off.
3. Slide the filter units
7
into the device along the guide rails all the way to the stop.
4. Replace the top part
2
and screw it down again
with the fixing screw
1
.
The filter units are inserted.
3
1
2
28

Table of Contents

Related product manuals