STEINEL professional Series User Manual

- 22 - - 23 -
GB
A
Attention
Product damage from improper
servicing
Servicing or repair work may only be
performed by Steinel service stations.
Sensor will not switch ON
Either incorrect settings have been
made, there is a power-related fault or
the sensor is faulty:
► Check the setting for the response
threshold and, if necessary, set a
higher lux level.
► Check the cables, connections and
the voltage supply, change a fuse if
necessary.
► Carry out a function test on the sen-
sor and on the lights connected, re-
placing any faulty items.
Sensor will not switch OFF
Either incorrect settings have been
made, manual override is activated or
there is permanent movement or a
source of heat in the detection zone.
► Check whether the response thresh-
old setting is too low, correcting the
setting if necessary.
► Check whether the light has been
switched ON manually via a switch.
► Check whether there are any sources
of heat or anything else inadvertently
triggering the sensor in the detection
zone and remove them.
► If necessary, limit the detection zone
with the shrouds.
► Increase distance between Wi-Fi
device and sensor >3m
Sensor switching ON when it
should not
The sensor is detecting constant move-
ment or a source of heat in the detection
zone, causing it to switch ON too often
or when it should not.
► Check the detection zone for sources
of heat or movement.
► Eliminate permanent sources of heat
from the detection zone.
► If necessary, limit the detection zone
with the shrouds.
► Increase distance between Wi-Fi
device and sensor >3m
Disposal
Electrical and electronic equipment, ac-
cessories and packaging must be recy-
cled in an environmentally compatible
manner.
Do not dispose of electrical and
electronic equipment as domes-
tic waste.
EU countries only:
Under the current European Directive on
Waste Electrical and Electronic Equip-
ment and its implementation in national
law, electrical and electronic equipment
no longer suitable for use must be col-
lected separately and recycled in an en-
vironmentally compatible manner.
Manufacturer’s Warranty
MANUFACTURER'S
1
3
5
YEAR
GB
WARRANTY
MANUFACTURER'S
YEAR
WARRANTY
MANUFACTURER'S
YEAR
WARRANTY
As purchaser, you are entitled to your
statutory rights against the vendor. If
these rights exist in your country, they
are neither curtailed nor restricted by our
Warranty Declaration. We guarantee that
your STEINEL Professional sensor prod-
uct will remain in perfect condition and
proper working order for a period of
5years. We guarantee that this product
is free from material-, manufacturing-
and design flaws. In addition, we guar-
antee that all electronic components
and cables function in the proper man-
ner and that all materials used and their
surfaces are without defects.
Making Claims
If you wish to make a claim, please send
your product complete and carriage
paid with the original receipt of pur-
chase, which must show the date of
purchase and product designation,
either to your retailer or contact us at
STEINEL (UK) Limited, 25Manasty
Road, Axis Park, Orton Southgate,
Peterborough, PE2 6UP, for a returns
number. For this reason, we recommend
that you keep your receipt of purchase
in a safe place until the warranty period
expires. STEINEL shall assume no liabili-
ty for the costs or risks involved in
returning a product.
For information on making claims under
the terms of the warranty, please go to
www.steinel-professional.de/garantie
If you have a warranty claim or would
like to ask any question regarding your
product, you are welcome to call us at
any time on our Service Hotline
01733 366700.
Technical specifications
Dimensions and versions
Diameter ×
height
121mm x 57mm
Colours white
Specifications
Supply voltage 220 – 240V
Mains frequency 50 / 60Hz
Switching capacity
Incandescent / halogen lamp load:
2000 W
Fluorescent-lamp electronic ballasts:
1500 W
Fluorescent lamps, uncorrected: 500 VA
Fluorescent lamps, series-corrected:
900 VA
Fluorescent lamps, parallel-corrected:
400 VA
Low-voltage halogen lamps:
2000 VA
LED < 2 W: 100 W
2 W < LED < 8 W: 300 W
LED > 8 W: 600 W
Capacitive load: 176 µF

STEINEL professional Series Specifications

General

Brand	STEINEL
Model	professional Series
Category	Security Sensors
Language	English