INSSGH1213
TROUBLE SHOOTING
The unit does not work
Defective thermostat or wrong thermostat setting
Open circuit breaker or fuse
The thermal protection has been activated
Faulty connections
The unit runs continuously
Defective thermostat or wrong thermostat setting
Heat losses higher than the unit capacity
The enclosure is extremely hot
Defective thermal protection
Defective motor
Blocked air vents
The desired room temperature cannot be reached
One or more elements are defective
Defective thermostat or wrong thermostat setting
Voltage lower than that written on the nameplate
Heat losses higher than the unit capacity
Room overheating
Defective thermostat or wrong thermostat setting
The unit cycles under control of the thermal protection
Blocked air vents
The breaker trips when the heater is turned on
Faulty connections
Voltage higher than that written on the nameplate
1
2 MO-016
3
3
1
2
Cut off power supply at circuit breaker/fuse before cleaning the unit.
non-abrasive dish soap. Do not use abrasive or chemical cleaners
dusty location, use a vacuum brush to remove dust and other foreign
objects from the grills.
MAINTENANCE
To Next Page
Loading...
