3
CONTENT
1. General Instructions ........................................................................................................6
2. Safety Instructions and Protective Measures ...................................................................6
General Safety Warnings for the Use of Power Tools ...............................................6
Additional Safety Instructions ...........................................................................8
Protective Measures.................................................................................................8
Personal Protective Equipment ................................................................................8
Emergency Stop Switch ...........................................................................................9
Residual Risk ...........................................................................................................9
Safety Symbols ........................................................................................................9
3. Designation and Dimensions of the Machines ............................................................... 10
4. Description .................................................................................................................... 10
Machine ................................................................................................................. 10
Workplace .............................................................................................................. 10
Intended Use of the Machine .................................................................................. 11
5. Drawings ....................................................................................................................... 12
Machine ................................................................................................................. 12
Control ................................................................................................................... 12
Installation Motor Driver Board 4
th
axis (optional) ............................................ 13
Installation and Operation of the internal D-Series WinPC-NC module
(optional item no. 12088 required) ................................................................... 13
6. Assembly, Setup and Installation of the System ............................................................ 15
Environmental Conditions ...................................................................................... 15
Positioning the Machine ......................................................................................... 15
Layout Recommendation ....................................................................................... 16
Electrical Connection of the Machine ..................................................................... 17
Tools and Accessories ........................................................................................... 17
7. Operation ...................................................................................................................... 19
Commissioning and safe Operation ........................................................................ 19
Mechanical Axes Limitation ............................................................................. 20
Emergency Stop .............................................................................................. 20
Semi Closed Loop System
TM
(optional) ........................................................... 20
Blockages due to Accidents or Malfunctions ................................................... 20
To Next Page
Loading...
