To Next PageTo Next Page
Need help?Do you have a question about the STEPCRAFT M.1000 and is the answer not in the manual?
Best practices for operating the power tool, including speed and feed.
How the emergency stop switch works and its impact on machine operation.
Covers safe practices for the work environment and electrical connections for power tools.
Machine protection and required personal protective equipment (PPE).
Details personal safety measures, including PPE, during operation.
Steps for adding the optional 4th axis driver board to the control unit.
Guide for fitting the internal D-Series WinPC-NC module into the control unit.
How to connect power supply and the control computer to the system.
Ensures correct wiring, understanding of documentation, and operator training.
Details on mechanical limits, emergency stop, and handling blockages.
Explains Freestyle Milling and how to secure workpieces.
Essential steps and precautions before performing maintenance on the machine.
Specific lubrication advice for igus lead screws, HIWIN ball screws, and guides.
Step-by-step maintenance instructions for the X, Y, and Z axes.
General| Control System Type | CNC |
|---|---|
| Interface | USB |
| Max. Feed Rate | 5000 mm/min |
| Positioning Accuracy | ± 0.05 mm |
| Repeatability | ± 0.02 mm |
| Compatibility | Windows |
| Software Compatibility | UCCNC |
| Power Supply | 230 V / 50 Hz |
