15
6. Assembly, Setup and Installation of the System
Environmental Conditions
The machine is solely suitable for the operation in dry, interior spaces.
Keep the environmental temperature of the machine dust-free. High dust exposure can cause dam-
ages to the system.
The humidity should be within normal limits for humidity indoors (40 to 60 %). Protect the machine
against wetness and humidity.
The ideal environmental temperature for the system lies between 18°C to 25°C, respectively from
64°F to 77°F.
Particularly protect the electronics against overheating by avoiding direct sun radiation or indirect heat-
ing up nearby a radiator.
Positioning the Machine
Place the machine on a suitable table or on a machine stand. To provide a comfortable working
height, we recommend a working height of approx. 840 mm. For a torsion-free stand, the surface of
the machine stand needs to be solid and even. The machine is to be secured in a way that it cannot
shift or fall down.
All movable parts of the machine must be able to operate collision-free.
The routing of the tool´s cables, such as with the milling motor, has to be effected in a way that the ca-
ble cannot be clamped between the guide ways of the machine. For this purpose, use the special Flexi
Guides™ on the top of the X-axis.
The machine has to easily accessible and operable. Especially the emergency switch has to be easily
accessible at all times.
Take care to ensure a sufficient illumination of the machine`s location and the workplace surrounding
the machine.
The PC controlling the machine has to be placed in the vicinity of the machine to have both in clear
view.
To Next Page
Loading...
