STEPCRAFT M.1000 - System Tools and Operation

22
System-guided Tools
System-guided tools can be clamped in the 43 mm Euro tool holder on the Z-axis.
The different tools can
- feature sharp, rotating insertion tools;
- have sharp, oscillating blades;
- emit class 4 laser beams;
- have sensitive probe tips;
- feature rotating housing parts.
Depending on the respective system-guided tool, you require (among others) 230 V, 24 V, additional
signal or compressed air.
Please strictly observe the operating manual of the respective tools!
Operation of the CNC System
The entire CNC system is controlled and operated via computer.
The operator must have completely read and understood the entire documentation of the CNC control
software before commissioning the CNC system.
For further questions regarding the applied control software, please contact the respective software
manufacturer.
8. Technical Data
Dimensions and Weight
Machine type
Dimensions
Workspace
Weight
M.500
L 726 x W 583 x H 646*mm
543 x 348 x 135 / 205 mm
28 kg
M.700
L 926 x W 713 x H 646*mm
743 x 479 x 135 / 205 mm
35 kg
M.1000
L 1226 x W 913 x H 646*mm
1044 x 679 x 135 / 205 mm
42 kg
* Machine height with extended Z-axis.