6
1. General Instructions
These operating instructions explain the STEPCRAFT M-Series and inform you about the correct han-
dling of the CNC system.
Please read these operating instructions as well as all accompanying documents in their entirety be-
fore commissioning of the system in order to become familiar with the characteristics and the opera-
tion of the product. The improper operation of the CNC gantry milling system can lead to damage to
the product and property and can cause serious injuries, electric shock and / or fire.
It is imperative to adhere to the safety instructions listed in these operating instructions at all times.
Should any doubts or the need for further information arise, do not hesitate to contact us prior to the
commissioning of the CNC system.
2. Safety Instructions and Protective Measures
General Safety Warnings for the Use of Power Tools
Work Area Safety
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate the power tool in explosive atmospheres, such as in the presence of flamma-
ble liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders at a distance while operating a power tool. Distractions can
cause you to lose control and can result in accidents.
Operate the power tool only in interior spaces on a solid, horizontal table or workbench.
Electrical Safety
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with grounded power tools. Unmodified plugs and matching outlets will reduce the
risk of electric defects and malfunctions.
Do not expose power tools to moisture. The power tool is only suitable for indoor use. Water en-
tering a laser tool will increase the risk of electric shocks.
Personal Safety
Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use a power tool while you are tired and/or under the influence of drugs, alcohol or
medication. A moment of inattention while operating a power tool may result in serious personal in-
All persons who operate the power tool must have read and fully understood all relevant
safety and operating instructions. Misunderstanding may result in personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment, such as
a suitable dust mask or ear protection, reduces the risk of injuries.
Dress properly. Do not wear loose clothing or jewelry. Pin your hair above your shoulders so
that it cannot get caught in the linear guides or moving parts.
This tool is controlled by a computer. During operation, it cannot be controlled directly. Lack of
caution or expertise as well as program errors can lead to unexpected movements.
Do not touch the insertion tools or motors as they can heat up significantly during operation.
Never place any parts of the tool or accessories in the mouth as this can lead to serious inju-
ries.
To Next Page
Loading...
