8
OPERATIONS Transporting
WARNING: Prior to transporting, the driver of the tow vehicle must assure the safety of the
operation. The driver must also know, and assure, the product temperature is within limits.
Trailer Hook-up
1. Connect trailer to towing vehicle.
a. Check that hitch is engaged properly.
b. Attach safety chains to towing vehicle.
c. Connect battery charging circuit to tow vehicle if required.
d. Connect electrical plug to towing vehicle.
e. Connect breakaway cable to towing vehicle.
f. Check operation of lights and brakes.
2. Secure trailer for transport.
a. Shut OFF the engine and burners.
b. Shut OFF all fuel valves.
c. Be sure the product temperature is not above the recommended operating tempera-
ture.
d. Securely latch the tank cover.
12 volt
battery
Connection to the tow vehicles battery is required
when the Stepp SBF is equipped with spark ignition or
electronic thermostats and does not have its own
charging system. (i.e.: onboard engine or generator)
The isolator will protect the battery on the trailer from
discharging through the tow vehicles electrical system.
+
-
Connect to 12 volt power on tow vehicle
14 GAUGE RED
ISOLATOR
TRAILER
To Next Page
Loading...
