Steren RM-150 - Setup method for remote controller; Method of code inputting

6
There are two setup methods for the remote controller (A and B); please
choose anyone.
A. Method of code inputting.
Turn on the power of your household electrical appliances manually and keep
them under normal playing state. Search the brand of household electrical
appliances from the code table and set up from the rst group of code of the
brand; repeat steps 2-5 until you nd the suitable code for your household
electrical appliances. If none of these codes can make your remote controller
work normally (or the brand of your household electrical appliance is not in
the table), please set up by the method B.
Setup method for remote controller
1. Turn on the power switch of the
household electrical appliance, such
as TV and VCR, etc. to be controlled
manually and aim the remote
controller at the receiving window of
the household electrical appliance.
2. Find out the rst code for the
household electrical appliance to
be controlled in the code list. For
example, your rst TV set is Aiko,
then the rst code should be 016.
CODE
SEARCH
0
ENTER
TV/AV
MUTE
PREV
-CH
MENU
SLEEP
+
VOL
VOL
-
CH
CH
Códigos de TV / TV Codes