Need help?Do you have a question about the Steris AMSCO 5000 Series and is the answer not in the manual?
Overview of the manual's content and importance for proper operation and maintenance.
Key notices, warnings, and recommendations for safe and effective equipment usage.
Specifies intended applications and details on service and maintenance programs.
Details permissible environmental conditions and the equipment's noise level.
Contact information for STERIS manufacturing and service locations.
Emphasizes the importance of safety precautions for operating and servicing the equipment.
Critical warnings for personal injury and potential equipment damage during operation.
Details electrical, chemical, burn, and slipping hazards with necessary precautions.
Lists specific cautions to prevent damage to the equipment during use or cleaning.
Defines various symbols found on equipment components and nameplates.
Explains symbols related to equipment transport and storage environmental conditions.
Overview of major components and controls of the washer/disinfector.
Details the chamber, doors, debris screen, HEPA filter, and spray arm assemblies.
Describes the condenser, its purpose, and the chemical injection pump system.
Overview of the control system, its modes, and the touch screen interface.
Explains the function of various touch pads used in the control system interface.
Highlights critical safety features like Emergency Stop pushbuttons.
Information on SCS Conveyor and ATLAS Workflow Automation Vehicle systems.
Discusses the importance of water and chemistries for equipment efficiency.
Crucial steps and warnings to follow before operating the equipment.
Details available accessories and provides essential loading guidelines.
Instructions for connecting flexible hoses to cannulated instruments.
Step-by-step guide for manually loading the washer/disinfector.
Instructions for loading the washer/disinfector using an automated system.
Details the sequence and phases of a typical operating cycle.
Procedures for unloading the washer/disinfector after cycle completion.
How to respond to alarms and safely shut down the equipment.
Provides general information on pre-programmed cycles and treatments.
Lists supervisor mode menus and procedures for accessing supervisor mode.
Procedures for copying and modifying equipment cycles.
How to transfer cycle reports and configure system settings.
Settings for password, chemical pump names, and measurement units.
Configuration for printer, date/time, and operating language.
View software version and access system test menus.
Manage cycle history and format USB keys for data transfer.
Introduces routine maintenance and information on preventive maintenance.
Provides a guide for routine maintenance tasks and their suggested frequencies.
Instructions for cleaning debris screen, water outlet, gaskets, and exterior.
Procedures for cleaning spray arms and processing the decontamination cycle.
Steps for replacing chemical containers and changing printer supplies.
Procedures for door safety, sump safety tests, and emergency stop verification.
General warnings and advice for troubleshooting equipment issues.
Troubleshooting for alarms related to load and unload doors.
Troubleshooting for sump filling, draining, and heating related alarms.
Addresses alarms related to temperature variations and pump operations.
Troubleshooting for power failures, communication issues, and memory errors.
Troubleshooting for door obstructions and conveyor system issues.
Diagnoses issues with chamber draining, abnormal noise, and barcode reader.
Troubleshooting for printout problems, interior light, and load cleanliness.
Provides information on ordering replacement parts and consumables for the unit.
To Next Page
General
