14
1) Enter the ID number of the part on the keyboard and press
the ID key.
2) Count parts using any method.
3) Press the SHIFT key and then press the 7|+ACCUM key to add
the displayed quantity to the accumulated quantity.
Subtract from Accumulator:
1) Enter the ID number of the part on the keyboard and press
the ID key.
2) Count parts using any method.
3) Press the SHIFT key and then press the 8|-ACCUM key to
subtract the displayed quantity from the accumulated
quantity.
Display Accumulated Quantity:
1) Enter the ID number of the part on the keyboard and press
the ID key.
2) Press the SHIFT key and then press the 9|MEMORY key to
display the total accumulated quantity for the entered ID.
3) Press RESET to return to the COUNT mode.
Clear Accumulated Quantity:
1) Enter the ID number of the part on the keyboard and press
the ID key.
2) Press the SHIFT key and then the 9|MEMORY key to display
the total accumulated quantity.
3) Press the SHIFT key and then the RESET|CLEAR key to clear
the quantity to zero.
COMPARATOR/SETPOINT OPERATION
Comparator: UNDER < Displayed value < OVER
Setpoints: SP 1/SP 2 > Displayed value
Enter Under/Setpoint 1 Value:
1) Enter the numeric value of the lower comparator threshold
or setpoint 1 via the numeric keypad.
2) Press the SHIFT key and then the 1|SP 1 key to enter the
value.
Enter Over/Setpoint 2 Value:
1) Enter the numeric value of the upper comparator threshold
or setpoint 2 via the numeric keypad.
2) Press the SHIFT key and then the 3|SP 2 key to enter the
value.
Display Under/Setpoint 1 Value:
1) Press the SHIFT key and then the 1|SP 1 key to display the
lower comparator or setpoint 1 value.
To Next Page
Loading...