STERWINS 20VLM2-33P.1 - 6. Wintering; 7. Storage; 7.1 Store the Machine; 7.2 Store the Lithium Batteries

298
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN
6. WINTERING
Plug out the battery from the power tool.
Before long storage please ensure the battery charge t to instructions provided on battery instruction
manual. Follow all instructions given on chapter storage below. We recommend using the original
package for storage or covering the product with a suitable cloth or enclosure to protect it against dust.
7. STORAGE
Only store the machine and the battery in a clean, dry, ventilated place with a temperature range of 4°C
to 24°C. Cover it in order to provide added protection. We recommend using the original package for
storage or covering the product with a suitable cloth or enclosure to protect it against dust. Be sure to
secure the unit while transporting
7.1 STORE THE MACHINE
Plug out the battery from the power tool. Examine the unit thoroughly for worn, loose or damaged parts.
Clean the unit before storing. Do not expose the product to sunlight. Make sure the product is always
protected from cold and humidity.
• Always allow the machine to cool down before storing.
7.2 STORE THE LITHIUM BATTERIES
Please make sure that the battery power level is as recommended in the battery instruction manual.
Please refer to the battery instruction manual for further details.
8. MAINTENANCE
DANGER! Risk of injury due to electric shock.
Remove the battery pack before adjusting, inspecting,
cleaning or storing the product.
8.1 CLEANING
Wipe o the housing and the plastic components using a moist, soft cloth. Do not use strong solvents
or detergents on the plastic housing or plastic components. Certain household cleaners may cause
damage, and may cause a shock hazard.
• Keep all nuts, bolts and screws tight to be sure the machine is in safe working condition.
• Check the grass collector frequently for wear or deterioration.
• Be careful during adjustment of the machine to prevent entrapment of the ngers
between moving blades and xed parts of the machine.
• Always allow the machine to cool down before cleaning.
• When servicing the blades be aware that, even though the power source is switched o,
the blades can still be moved.
• Replace worn or damaged parts for safety. Use only genuine replacement parts and
accessories.