299
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN
8.2 CHANGING THE CUTTING BLADE
Turn the mower onto its side to reveal the underside of the machine. Place a block of wood or a stop of
some kind between the blade and the edge of the deck to prevent the blade from turning freely. Using
a wrench , loosen the blade nut on the bottom of the unit . Remove the blade nut, the washer, and the
blade from the machine.
Put the new blade onto the shaft and replace the blade washer and the blade nut. Tighten the blade nut.
Torque the blade nut to 25-30 N•m. Once the blade is secure, check by hand that everything rotates as
it should.
8.3 EXPLODED VIEW
POS PART NUMBER DESCRIPTION NUM
1 A022033-009-00 switch box component 1
1-1 8206-000001-00 Bolt 9
1-2 8020-512012-01 Cover 1
1-3 8020-512011-00 Cover 1
1-4 A022033-004-00 Switch box 1
1-5 8044-512010-00 Trigger 1
To Next Page
Loading...
