13
Before installing
Read this manual carefully before installing the equalizer.
The assembly instructions must be followed as well as the connections, to the best use of
the product. If needed, consult our Customer Service. Before use, it’s indispensable to pay
attention to some info:
• Be sure the device is o before making or removing any connection. It prevents possible
damage to the gadgets connected to the equalizer.
• Distribute all the cables as far as possible from the ignition cables, ECU modules, and
starter key, as they can generate interferences at the sound.
• Use cables and connectors of good quality, as this ensures the quality and fidelity of sound.
• To not damage your cables, pay attention to not passing them close to sharp metal edges.
Installation
For installation, choose a place with easy access to the product.
The fixation (when necessary)
can be made with a set of corner
brackets that comes with the
product. Set the corner bracket
through the holes on the sides
of the product using screws. Be
sure the installation is done in a
steady, ventilated and dry place.
Use a 1A fuse at a distance of most 30cm/1ft of battery for protection.
To Next Page
Loading...