Need help?Do you have a question about the STEYR MO236K42 and is the answer not in the manual?
Provides a comprehensive overview of STEYR MOTORS marine engines.
Details product references, illustrations, and specifications for engine compatibility.
Covers insurance, stolen units, and owner identification for protection.
Outlines installation procedures, pre-delivery inspection, and dealer maintenance.
Explains illustration symbols, repair services, and replacement parts.
Covers engine submersion, bottom painting, boat bottom care, and boating safety.
Explains various symbols used in the manual for clarity and safety.
Step-by-step procedures for starting and stopping the marine engine.
Details break-in procedures, first hours, and operation after break-in.
Explains shifting mechanisms, remote controls, and speed control.
Covers instrument panels, warning lights, alarms, ECU, and diagnostic systems.
Information on propellers, fuel systems, cooling, and electrical components.
Covers inversion switch, dry operation, and instrument panel specifics.
Details fuel specifications, selection criteria, and charts for optimal performance.
Provides recommendations for motor oil, ACEA/API codes, and SAE viscosity.
Guidelines for the proper disposal of automotive waste products.
Instructions for locating and recording engine and gearbox model/serial numbers.
Detailed technical specifications for the MO54NA33 engine model.
Detailed technical specifications for MO84K32, MO94K33, MO114K33 engine models.
Detailed technical specifications for MO144M38, MO164M40, MO174V40 engine models.
Detailed technical specifications for MO196K35, MO236K42 engine models.
Detailed technical specifications for MO256K43, MO256H45 engine models.
Detailed technical specifications for MO286H43, MO156K25, MO126K25 engine models.
Detailed technical specifications for the MO306H43WJ engine model.
Foreword and important notes regarding engine service and maintenance.
Provides a schedule for regular maintenance and a log for recording service.
Details instrument panel error codes and service code reading/clearing procedures.
A chart to help diagnose and resolve common engine symptoms and issues.
Explains wiring harness components and provides detailed wiring diagrams for various models.
Procedures for checking motor oil, coolant, power steering, and transmission oil levels.
Covers raw water systems, anodes, belts, air filters, and engine alignment.
Information on selecting the correct propeller for optimal engine performance.
Outlines dealer responsibilities, commissioning reports, storage, and engine logs.
Explains the terms and conditions of the limited engine warranty.
Information on recording engine details and owner identification cards.
Provides contact details for STEYR MOTORS' service network.
To Next Page
General