Need help?Do you have a question about the STEYR MO256H45 and is the answer not in the manual?
Provides an overview of the STEYR MOTORS marine engine.
Details product references, illustrations, and specifications.
Information regarding the owner identification card for engine registration.
Details the installation and pre-delivery inspection process.
Explains the meaning of symbols used in illustrations.
Guidance on obtaining repair services for the engine.
Provides crucial safety information for engine operation.
Essential checks and procedures before starting the engine.
Step-by-step instructions for starting the engine.
Procedure for safely stopping the engine.
Procedure for running in the engine after major overhaul.
Instructions for breaking in the engine to ensure longevity.
Guidance on operating the engine after the break-in period.
Instructions on how to shift gears safely.
How to operate the remote control system for the engine.
Description and layout of the instrument panel.
Information on the emergency cut off switch and its function.
Explanation of warning lights and audible alarms for engine status.
Details about the Electronic Engine Control Unit and its functions.
Overview of the engine's diagnostic system.
Specifies the fuel requirements for optimal engine performance.
Guidance on selecting appropriate fuel for the engine.
A chart detailing fuel classifications and test procedures.
Information on engine lubrication and recommended oils.
Details on recommended motor oils and specifications.
Guidelines for the proper disposal of waste products.
Information on locating engine and gearbox model/serial numbers.
Specific technical data and overview for the MO54NA33 engine model.
Technical data and overview for MO84K32, MO94K33, MO114K33 engines.
Technical data and overview for MO144M38, MO164M40, MO174V40 engines.
Technical data and overview for MO196K35, MO236K42 engines.
Technical data and overview for MO256K43, MO256H45 engines.
Technical data and overview for MO286H43, MO156K25, MO126K25 engines.
Technical data and overview for the MO306H43WJ engine.
Schedule outlining routine maintenance tasks and intervals.
Table detailing error indications on the instrument panel.
Error indications on the instrument panel specifically for SOLAS models.
Procedure for reading stored service codes from the engine.
A list of principle service codes and their meanings.
A chart to help diagnose and troubleshoot engine problems.
Wiring diagram for marine base connections on 12V systems.
Wiring diagram for instrument CAN panel connections on 12V systems.
Procedure for checking the engine's motor oil level.
Instructions for refilling the engine's motor oil.
Procedure for checking coolant level in the closed cooling circuit.
Instructions for draining the engine's raw water circuit.
Maintenance and inspection of cooling system anodes.
Maintenance checks for Poly-V-belt and serpentine belts.
Procedure for checking and replacing the air filter.
Guidance on adjusting various engine belts.
Information and guidance on selecting the correct propeller.
A checklist for dealers during engine installation and commissioning.
The report form for engine commissioning and initial checks.
Steps for preparing the engine for off-season storage.
Procedure for starting the engine after it has been in storage.
Details the terms and conditions of the limited engine warranty.
Recording engine, gearbox, boat model, and hull identification numbers.
Information on the STEYR owner identification card.
Information on the STEYR MOTORS worldwide service network.
To Next Page
General