43
SAE
5 W-50
10 W-40
API
SERVICE CODE
CF
13
ACEA E7 or B4-02
ACEA E7 or B4-02
API CF
Engine Lubrication
If you choose to lubricate your STEYR MOTORS Marine Engine
yourself, refer to the Lubrication and Inspection Chart for lu-
brication points and recommended lubricants. Use only STEYR
MOTORS recommended lubricants or lubricants of equivalent
quality and viscosity. See your STEYR MOTORS dealer for rec-
ommended lubricants.
If you choose to have your STEYR MOTORS Marine Engine lu-
bricated, see your local dealer. He will gladly lubricate it at the
required intervals.
Motor Oil
To obtain the best engine performance and engine life, STEYR
MOTORS TURBO Diesel Engine Oil SAE 5 W-50 or 10 W-40
(Z010058/0) is recommended. Motor oils are specified by ACEA,
API service codes and SAE viscosity numbers. If STEYR MOTORS
TURBO Diesel Engine Oil is not available, you are required to
use a reputable brand of motor oil labelled for ACEA E7 or B4-
02, API CF Service codes and SAE viscosity number 5 W-50 or
10 W-40. Refer to oil identification symbol on the container.
Initial factory fill is a full synthetic high quality break-in oil specified
ACEA E7, API CF, SAE 10 W-40. During the break-in period (ini-
tial 20 hours), frequently check the oil level. Somewhat higher oil
consumption is normal until piston rings are seated. The oil level
should be maintained between the minimum and maximum marks
on the dipstick. The space between the marks represents approxi-
mately 3.7 quarts (3.5 litres). For oil level dipstick location, refer
to section Maintenance.
After first 50 hours of operation change the motor oil and replace
the oil filter. Refer to Service and Maintenance Schedule.
Oil Identification Symbol
Motor oils are specified by ACEA, API service codes, and SAE
viscosity numbers. These may be found on the label, top of can,
or oil identification symbol.
NOTE: Some oils meet more then one ACEA or API service
rating. The recommended ACEA or API service
codes must be among these service ratings.
„ Top of Can
” Oil Identification Symbol
FOR HEAVY DUTY
DIESEL ENGINES
14
To Next Page
Loading...
Need help?
General
